Specification
Model: HGCG01-XL
INGCO Cut Resistance Rubber Gloves HGCG01-XL
Size: XL
Protection level: 4 x 42C
Use for timber and glass cutting worker, heavy sharp objects carriers etc.
PU coated palm, flexible and good feeling.
HPPE shell, cut-resistance and abrasion.
Antistatic

Model: HGCG02-XL
Size: XL
Liner Material: HPPE shell, Level 5 cut-resistant glove core
Coating material/Finish: PU
Gauge:13
Protection level: 4 x 43C
1pair/paper
Use for timber and glass cutting worker, heavy sharp objects carriers etc.
PU coated palm,flexible and good feeling.
HPPE shell,cut-resistance and abrasion.
Antistatic

1. ABRASION RESISTANCE
The material is subjected to abrasion by a sandpaper under a determined pressure. The protection level is indicated on a scale of 1 to 4 depending on the number of turns required until a hole appears in the material. The higher the number is, the better the resistance to abrasion.
2. CUT RESISTANCE, COUP TEST
The cut protection is tested. A knife is passed over the glove material until it cuts through. The protection level is given by a number between 1 and 5, where 5 indicates the highest cut protection. If the material dulls the knife during this test, the cut test ISO 13997(TDM test) shall be performed instead, see point 5.
3. TEARING STRENGTH
The force required to tear the glove material apart is measured. The protection level is indicated by a number between 1 and 4, where 4 indicates the strongest material.
4. PUNCTURE RESISTANCE
Based on the amount of force required to puncture the material with a tip. The protection function is indicated by a number between 1 and 4, where 4 indicates the strongest material.